Share
Dip Cuts 15.7m @ 74 g/t Ag Eq Incl. 704 g/t Ag Eq @ 0.35m & 1379
g/t Ag Eq @ 0.6m
Investorideas.com (Investorideas.com
Newswire), a top 100 rated investment site for retail Investors
following mining stocks reports on breaking news and trading for
silver/gold stock Kingsmen Resources Ltd. (TSXV: KNG) (OTCQB: KNGRF) ( FSE: TUY).
Kingsmen Resources Ltd. (TSXV: KNG) (OTCQB: KNGRF) (FSE: TUY) is
pleased to report assays from diamond drill holes LC-25-005, LC-25-006
and LC-25-007 drilled on the Soledad mineralized structure. Assays
from hole LC-25-010, drilled as an undercut to LC-25-005, were
previously reported on September 24, 2025.
Highlights:
LC-25-005: 15.7 meters @ 74 g/t Ag Eq (46 g/t Ag) in alteration zone
(107.5-123.2m) including:
Upper zone: 704 g/t Ag Eq (460 g/t Ag) over 0.35m (108.5 – 108.85m)
Lower zone: 1379 g/t Ag Eq (848 g/t Ag & 0.87g/t Au) over 0.6m
(115.6-116.2m)
Increasing width and grade of the silver mineralization in LC-25-010
(previously reported) clearly show the potential at depth for untested
significant high grade silver mineralization:
1,028 g/t Ag Eq over 1.45 meters (455 g/t Ag) from 190.25-191.70m
including 1,742 g/t Ag Eq over 0.70 meters (770 g/t Ag) from 190.85-
191.55m
Holes LC-25-006 and LC-25-007 intersected old workings where the
Soledad mineralization had been mined out by ASARCO. This accounts for
the absence of Soledad mine mineralization in hole LC-25-006 and
LC-25-007
High-grade silver intersection in LC-25-006, and the high-grade silver
and gold intersections in LC-25-007, coupled with wide alteration
show, show potential for untested silver and gold mineralization along
strike and at depth
President, Scott Emerson, commented, “Holes LC-25-005 and LC-25-010
show the significant silver mineralization is increasing in width and
is open at depth and on strike. As well, the high-grade silver
intersection in LC-25-006, and the high-grade silver and gold
intersections in LC-25-007, show untested potential along strike and
at depth. These four holes confirm continuity of mineralization that
is open along strike and at depth.”
Holes LC_25-005, LC-25-006 and LC-25-007 were drilled to test for
Soledad mineralization at depth. LC-25-006 and LC-25-007 intersected
old workings where the Soledad mineralization had been mined out by
ASARCO. LC-25-005 did not intersect any old workings. The geological
sequence consists of variably sheared and interbedded arenite and
lutite. The lutite is more ductile and deformation is most clearly
seen in this rock type. Alteration comprises green
chlorite-epidote-nontronite and sericite with pyrite-calcite veinlets,
sphalerite-(galena) veinlets, grey to white bleaching +/- disseminated
pyrite (mm-cm) size. Alteration varies from 5 – 80% of the core,
frequently appears “foliated” and appears to be preferentially
developed in ductile lutites and. Disseminated pyrite is
preferentially developed in arenite.
LC-25-010, drilled as an undercut, intersected a 13.5 meter wide zone
grading 64.3 g/t silver (178.35-191.70m) including 1.45 meters grading
455 g/t silver (190.25-191.70m) and 0.7 meters grading 770 g/t silver
(Figures 1, 2 and 3) and Table 1. The intersection is approximately 70
meters down dip and below the intersection in LC-25-005. In common
with the other holes the mineralization contains high levels of zinc
and lead, as well as anomalous levels of pathfinder elements arsenic,
bismuth and antimony as well as indium (Table 1). Significant gold of
0.60 g/t is associated with an arsenopyrite rich zone.
Hole LC-25-005 intersected two zones of high-grade silver within a
15.3 meter alteration zone (Figures 2 and 3).
Upper zone:460 g/t Ag over 0.35m (108.5 – 108.85m)
Lower zone: 848 g/t Ag & 0.88g/t Au over 0.6m (115.6-116.2m)
Both zones carry high levels of zinc and lead, as well as anomalous
levels of pathfinder elements arsenic, bismuth and antimony (Table 2).
This unmined mineralization is interpreted to be part of the Soledad
zone mineralization that was mined by ASARCO.
Hole LC-25-006 was drilled as 50-meter step out to the SW (Figure 2).
The Soledad zone has been mined out (104.3-105.9m) (Figure 4 and Table
2). Remnant footwall mineralization of 472 g/t silver over 0.30m was
intersected. The mineralization contains high levels of zinc and lead,
as well as anomalous levels of pathfinder elements arsenic, bismuth
and antimony.
Hole LC-25-007 was drilled as a 50 meter step out to the NW (Figure
2). The Soledad zone has been mined out (118.1-120.1m) (Figure 5 and
Table 2). Remnant footwall mineralization of 115 g/t silver and 0.49
g/t gold over 0.25m was intersected as well as 0.34 g/t gold over
1.0m. The mineralization contains high levels of zinc and lead, as
well as anomalous levels of pathfinder elements arsenic, bismuth and
antimony (Table 4). The mineralization is within a 100-meter-wide zone
of alteration from 51.5-118.1m above the mined out area and from
120.1-151.4m below it. The width of the alteration zone in LC-25-007
is significantly wider than in holes LC-25-005 and LC-25-006 and
indicates potential for additional mineralization along strike.
Full news, results and images
https://ca.finance.yahoo.com/news/kingsmen-resources-ltd-drilling-confirms-135100407.html
Kingsmen Resources Ltd. (TSXV: KNG) (OTCQB: KNGRF) (FSE: TUY) is a
featured mining stock on Investorideas.com
More info on KNG at Investorideas.com Visit:
https://www.investorideas.com/CO/KNG/
Follow us on X @investorideas @stocknewsbites
Follow us on
Facebook
https://www.facebook.com/Investorideas
Follow us on YouTube
https://www.youtube.com/c/Investorideas
Contact Investorideas.com
800 665 0411
Disclaimer/Disclosure: This content featuring Kingsmen
Resources is paid for content at Investorideas.com, part of a
monthly marketing mining stock showcase
(payment disclosure). Our site does not make recommendations for
purchases or sale of stocks, services or products. Nothing on our sites
should be construed as an offer or solicitation to buy or sell products
or securities. All investing involves risk and possible losses. This
site is currently compensated for news publication and distribution,
social media and marketing, content creation and more. Disclosure is
posted for each compensated news release, content published /created if
required but otherwise the news was not compensated for and was
published for the sole interest of our readers and followers. Contact
management and IR of each company directly regarding specific questions.
